Curta Type 2a - Arithmeum Curta - Prototyp P-005 mit 12 X 7 X 16 Stellen - 1949 - Kurzbeschreibung - Brief description

Curta Type 2a - (unvollständiger) Prototyp P-005 mit 12 X 7 X 16 Stellen "CURTA" SYSTEM CURT HERZSTARK  

Curta Type 2a - (incomplete) Prototype P-005 with 12 X 7 X 16 digits "CURTA" SYSTEM CURT HERZSTARK

 

Picture: © Arithmeum, University of Bonn, Germany


Kurzbeschreibung Prototyp P-005 - Curta Type IIa - 1949

Nach der Einführung der Curta Type I wurde von den Kunden nach einer Curta mit grösserer Kapazität gefragt - also mit mehr Stellen. Zwei grössere Curtas sollten auf den Markt gebracht werden, eine Curta Type II mit 11 X 9 X 14 Stellen und eine Curta Tape IIa mit 12 X 7 X 16 Stellen. Beide Typen wurden bereits 1949/1950 in diversen Broschüren der Contina AG veröffentlicht - die Bezeichnung Curta Type IIa stammt von dieser Broschüre und wird sonst an keiner Stelle erwähnt. In der Biographie wurde von Curt Herzstark der Prototyp mit 12 X 9 X 16 Stellen erwähnt - ob diese und die oben erwähnte Variante mit 11 X 9 X 14 Stellen auch realisiert wurden, ist nicht bekannt.

Eigenschaften Prototyp P-005 - Curta Type IIa

  • 12 Stellen im Einstell-Werk
  • 7 Stellen im Umdrehungs-Zählwerk
  • 16 Stellen im Resultat-Zählwerk 
  • Entwickelt und hergestellt in den Jahren 1949/1950
  • Die meisten Teile entsprechen in der Konstruktion der Curta Type 1 - ausser der Stufenwalze und den korrespondierenden Teilen.
  • Als Besonderheit sind die Ziffernrollen des Umdrehungs- und Resultat-Zählwerks mit
    kleinen Einstellrädern ergänz - zur direkten Einstellung von Werten
  • P-005 ist unvollständig, es fehlen Löscherkappe und Kurbel. Am Rundwagen fehlt die Nummerierung 1 bis 16 des Resultat-Zählwerks


Das Serienmodell Curta Type II wurde dann mit 11 X 8 X 15 Stellen realisiert. Dies war zudem leicht grösser in den Abmessungen und hatte mehr eigenständige (nicht Curta Type I basierende) Einzelteile als der Prototyp. 

Ein weitere Erwähnung ist in "Neue konstruktive Wege im Rechenmaschinenbau" - Von Prof. Dr. Karl Holecek, Techn. Hochschule Wien - 19./20. Oktober 1950 zu finden:
      "Zwei grössere Modelle mit 11 X 9 X 14 und 12 X 7 X 16 Stellen sind bereits im Bau. Der Grösstdurchmesser dieser beiden Bauarten beträgt 63 mm, die Höhe, so wie beim kleineren Modell, 100 mm und das Gewicht 300 g. Die Maschinen lassen sich also immer noch sehr bequem in der Hand halten und bedienen. Weitaus die meisten Bestandteile sind für alle Modelle die gleichen, ..."


Brief description of the Prototype P-005 - Curta Type IIa - 1949

After the introduction of the Curta Type I, customers were asking for a larger-capacity Curta - meaning more digits. Two larger Curtas were to be launched on the market: a Curta Type II with 11 X 9 X 14 digits - and a Curta Tape IIa 12 X 7 X 16 digits. Both published 1949/1950  in some brochures by Contina AG - the designation Curta Type IIa is from this brochure and is not mentioned anywhere else. In the biography by Curt Herzstark, a prototype with 12 X 9 X 16 digits was mentioned - and it's not known whether these and the above-mentioned variant with 11 X 9 X 14 digits were also realized.


Characteristics of Prototype P-005 - Curta Type IIa

  • 12 digits in the setting register
  • 7 digits in the revolution counter
  • 16 digits in the result dial
  • Developed and manufactured in 1949/1950
  • Most parts in the construction correspond to the Curta Type 1 - except for the step drum and the related parts.
  • As a special feature, the number wheels of the revolution and the result counter
    were enhanced with small dials for direct setting of values
  • P-005 is incomplete - there is no clearing plate nor the crank. At the carriage assembly the numbering 1 to 16 of the result work is missing.

Finally, the production model Curta Type II was realized with 11 X 8 X 15 digits. This was also slightly larger in size and had more unique (not Curta Type I based) items than the prototype.

Another note can be found in "Neue konstruktive Wege im Rechenmaschinenbau" - by Prof. Dr. Karl Holecek, Techn. Hochschule Wien - 19./20. October 1950:
      "Two larger models with 11 X 9 X 14 and 12 X 7 X 16 digits are already under construction. The largest diameter of these two types is 63 mm, the height is the same as in the smaller model, 100 mm and the weight 300 g. The machines are still very comfortable to hold and operate. By far the most components are the same for all models, ..."


© red-garlic design | All rights reserved - Alle Rechte vorbehalten - Tous droits réservés